Table of Contents
Advertisement
Specification
Specification summary
Input:
19-33 MJ/h
Output:
3.8-7.5 kW*
Efficiency:
80%
Heating area:
up to 116 m
Gas type:
NG or ULPG
A direct vent inbuilt gas fireplace with
a glass front and convection fan (top
discharge). Operated with a remote
control (7-day programmable timer).
* Will vary according to gas type
and flue configuration
** Will vary depending on
geographical location in NZ
Data plate
Centre front of base panel, behind
the service panels.
Gas connection
½ " BSP male flare. This connects
straight into the gas control on the
lower left hand side of the unit.
995
890
C L
440
1060
Cover panel: 150 mm opening on both sides of the unit. Covers are removed only when a Symmetry heat transfer
1
kit is installed.
Standard metal outer frame
1006ID
4 | Symmetry RDV3611 installation guide 11156-H 08-21
Ignition
Integrated sparker to pilot.
Noise
level: 37-45 dB(A)
2
**
Flue
Inner 100 mm, outer 170 mm.
Appliance must be installed with a
Rinnai flue system.
Power consumption and electrical
supply
High
Standby <1 W
Comes with a 1.5 m power cord and
3-pin plug. The standard electrical
connection is to the right hand side of
the appliance.
Safety devices
Light to pilot, delayed ignition,
overheat switch, electronic flame
failure supervision, and combustion
chamber relief.
1110
Temperature control
Thermostatic, temperature control
range 7-32 °C.
Weight: 60 kg
Installation considerations
Maximum flue height is 5.4 m.
Smaller rooms will heat up quickly,
and due to the efficiency of the
appliance, the fire will turn off once
the set temperature has been
reached.
50 W
The Symmetry looks and performs
best when installed close to the floor.
If the unit is installed higher up the
wall the movement of air from the
convection fan, depending on the
room configuration, could create
draughts.
1090
715
Premium flat metal outer frame
1
190
1155
Advertisement
Table of Contents
