Specification - Rinnai Neo RIB2311N Installation Manual

Specification

Neo (RIB2311N/RIB2311L)
Description
- Inbuilt gas space heater
- Burning log effect
- Glass front with glass dress guard
- Convection fan—top air discharge
Installation options
- Inbuilt masonry
- Inbuilt mock chimney
- Freestanding options
Combustion method
Bunsen type burner.
Data plate
Inside appliance on the front left hand side.
Flue - masonry
Rinnai strongly recommends the use of a Rinnai
flexiliner flue system (flexi Ø 100 mm). Failure to
meet this criteria may result in an unsafe situation.
Installation without a flexiliner flue is permissible as
long as the chimney is checked for soundness and
ability to achieve a good draw. Terminal 240 mm x
45 mm rear discharge (spigot).
Flue - decorative (mock chimney) and
freestanding
Natural draft flue. An approved 100 mm cowl must
be fitted to all installations. Decorative chimney
installations require a Rinnai zero clearance box and
zero clearance flue kit.
Flue dimensions:
Inner: 100 mm
Outer: 150 mm
Gas connection
½ " BSPT, the gas supply terminates inside the heater
at the front lower right hand side of the appliance.
Gas type
NG and General Product LPG.
Convection fan
2-speed centrifugal, double diameter 160 x 180 mm.
Heating area
NG: up to 107 m
2
ULPG: up to 93 m 2
Ignition
Continuous spark electronic ignition.
Input/output
Input NG: 14-30 MJ/h
Input ULPG: 14-27 MJ/h
Output NG: 3.24-6.94 kW
Output UPLG: 2.98-6.04 kW
Noise level
37-45 dB(A)
Power consumption
High: 50 W
Standby: <3 W
1500 mm power cord is supplied with a 3-pin plug on
the rear left of the appliance.
Safety devices
- Overheat switch
- Electrical fuse
- Flame failure sensing system
- Power failure
Temperature control
ETR models—thermostatic, temperature control
range 7-32 °C.
Thermal efficiency
NG: 80.5%
ULPG: 80%
Weight
60 kg
Neo installation guide: 11906-F 06-14 | 5