Table of Contents
Advertisement
Contents
Specification ............................................................... 4
Gas supply.................................................................. 5
Electrical supply.......................................................... 5
Framing dimensions ................................................... 6
Clearances from combustibles ................................... 7
TV installation ............................................................. 9
Installation overview ................................................... 10
Mounting bracket installation ...................................... 11
Installing the Symmetry and fixing to the frame.......... 12
Cladding ..................................................................... 13
Flue restrictor installation............................................ 14
Log set installation ...................................................... 15
Commissioning ........................................................... 17
Test operation and lighting sequence ......................... 18
Fitting the frames and optional dress guard ............... 19
Installation checklist and customer handover ............. 19
Wiring diagram ........................................................... 20
General flueing guidelines .......................................... 22
Flueing options ........................................................... 24
Symmetry RDV3611 flue kits ...................................... 26
Symmetry RDV3611 horizontal flue kits ..................... 27
Symmetry RDV3611 flue components ........................ 28
Horizontal termination example .................................. 30
Vertical termination example ...................................... 31
Installer please note
The Symmetry RDV3611 is recommended for a new build installation into a false (mock) chimney.
It is not suitable for retrofitting into an existing masonry fireplace.
Appliance, including the flue, is installed after framing and before cladding. Rinnai strongly
recommend the appliance is fully tested BEFORE any material is applied, as installation problems
may result in the fire needing to be pulled out-this is difficult if cladding has been installed.
Advertisement
Table of Contents
