Table of Contents
Advertisement
13
Startup and Shutdown Settings
The Startup and Shutdown page allows you to configure startup and shutdown conditions of the NVR.
Startup
Select this option to enable the Startup Delay feature, where
the NVR will wait for a set duration before starting up
•
Startup Delay: Enter the amount of time (in seconds) the
NVR will wait before starting up.
Offload
•
Wait for host to offload: Enter the amount of time,
between 1 to 21600 seconds (decimal values are not
the NVR will continue to offload data to a server after the
vehicle's ignition has been turned off.
Shutdown
•
Continue Recording After Ignition Off: Enter the amount
of time,
between 1 to 21600 seconds (decimal values are not
allowed), the NVR will continue to record after the vehicle's
ignition has been turned off.
ROADRECORDER® 9000 USER GUIDE
Schedule Reboot
allowed),
Internal UPS
Click Apply to save changed entries.
•
Enable schedule reboot: If enabled, NVR will reboot on
the selected day(s) and specified time.
•
Days: Select which day(s) the NVR will reboot at a
specified time.
•
Time: Select the time (in 24-hour format) the NVR will
reboot on the selected day(s).
•
Backup Power Record Duration: Enter the amount of
time,
between 0 to 10 minutes (decimal values are not
allowed), the NVR will continue to record when a battery
power failure has occurred, and internal UPS is supplying
backup power.
Advertisement
Table of Contents
