Startup - Safety Vision OBSERVER 4120 User Manual

Startup

ON/OFF
• ON/OFF mode: select Timer to power the HVR on and off
at set specific times; select Ignition to power the HVR on
and off with the vehicle's ignition; select Ignition or Timer
to power the HVR on during both conditions
• Shutdown Delay: enter the amount of time, in seconds,
that the HVR will wait to shut down after the vehicle's
ignition has been turned off
• Shutdown Record: enter the amount of time, in seconds,
that the HVR will continue to record after the vehicle's
ignition has been turned off
• Timer From: enter the exact times each day the HVR
powers up and powers down when using the Timer ON/
OFF mode
• Monitor mode: select Automatic power up to turn the
SV-CP4-HYB monitor on automatically with the HVR; select
Auto-standby to leave the monitor in standby mode (must
be touched to activate) when the HVR is powered on
Sleep
• Low voltage protection: select this option to automatically
shut down the HVR when the power it receives drops
below the specified voltage
• Shutdown voltage: enter the minimum voltage, in
volts, that the HVR can receive before it automatically
disconnects from OMS or shuts down
• Start up voltage: enter the minimum number of volts the
HVR must be receiving before starting up
• Upload to server; select this option to allow the HVR to
continue to upload data to an OMS server while under
voltage protection
OBSERVER 4120 USER GUIDE
After making any entries, tap Save at the bottom of the screen.
23