1> Multiple Punch In/Out Function In List Play Mode; Using The Multiple Punch In/Out Function In List Play Mode - Fostex DV40 Supplement Owner's Manual

<1> Multiple Punch In/Out function in LIST PLAY mode
It is now possible to implement multiple punch in/out function for ADR (Automatic Dialog
Replacement) purpose. This is the mode to create a new BWF file every time punch in/out
function is executed in the LIST PLAY mode. If the "ALE File Link" LIST PLAY mode is selected,
the punch in/out information is automatically recorded in the ALE file.
<NOTE>
Only the following BWF file types recorded in NORMAL mode can be used with the Multiple Punch In
/ Out feature in the LIST PLAY mode. Neither SDII files or files recorded in TAPE mode can be used
with this feature. When recording, only the "NEW FILE" AUDIO READY SW can be selected. It is not
possible to record by selecting either the "INSERT" or "TC RDY" SWs.
<Track Mode & FS/Bit combination for Multiple Punch In / Out>
Track Mode
Mono Track
Stereo Track
4 Track
Executing Multiple Punch In / Out in LIST PLAY mode
The following examples assume that the LIST PLAY mode is activated beforehand. For the LIST
PLAY mode, refer to the original owner's manual and the V1.2 owner's manual supplement.
<Executing Multiple Punch In / Out in "ALE FILE Link" LIST PLAY mode>
Executing Multiple Punch In / Out's by selecting the "ALE FILE Link" in the LIST PLAY mode allows
every recorded TAKE to be added to the existing ALE file.
Punching in redundantly while playing back an existing file updates the ALE file information. How-
ever, since a file previously recorded has a priority, the punch-in file will not be reproduced in the
LIST PLAY mode.
1. Press the AUDIO READY [NEW FILE] SW. (The NEW FILE LED flashes.)
Remember in the LIST PLAY mode, only the "NEW FILE" AUDIO READY SW can be turned on and off.
2. Press the [PLAY] key to start the "LIST PLAY" mode.
3. Press the [RECORD] key at the point where you would like to Punch In.
The DV40 changes mode from PLAY to RECORD.
4. Press the [PLAY] key at a point where you would like to Punch Out.
The DV40 changes the mode from RECORD to PLAY.
The above punch in/out procedures can be recorded up to 199 times.
<NOTE>
Registering the CUE point is not possible in the LIST PLAY mode.
<NOTE>
Never turn the power off before the message " Pls Wait! " is extinguished.
If you do so, all the TAKEs you made will become invalid.
5. Press the [STOP] key after you have finished punching in / out.
The DV40 will then start creating the files made by the Multiple Punch In / Out function after the
[STOP] key is pressed.
The length of time it takes depends the number of punch in / out's made. It takes about 1 second per
punch in / out made (take) to create 1 file.
Model DV40 Owner's Manual <Version V1.3 Supplement>
44.1kHz/16bit, 44.1kHz/24bit, 48kHz/16bit, 48kHz/24bit, 88.2kHz/24bit, 96kHz/24bit
44.1kHz/16bit, 44.1kHz/24bit, 48kHz/16bit, 48kHz/24bit, 88.2kHz/24bit, 96kHz/24bit
44.1kHz/16bit, 44.1kHz/24bit, 48kHz/16bit, 48kHz/24bit
FS/Bit
3