Network Connection; Login - Bolin Technology FEX30BHD-RNP2 User Manual

Fixed 4k/hd ip zoom camera
Table of Contents

Advertisement

Installing the ActiveX
The following message will show in IE browser on first login.
Click Run. You may also click Save to download the file to your computer first.
Close the browser and follow the steps to complete the installation.
NOTE:
For your first login with Windows 7, if the system does not prompt you to install ActiveX, follow these steps to turn off UAC:
Click the Start button, and then click Control Panel. In the search box, type UAC, and then click Change User Account Control
Settings. Move the slider to the Never Notify position, and then click OK. After UAC is turned off, log in again.
If the installation fails, open Internet Option in IE before login. Click the Security tab, click Trusted sites, and then click Sites
to add the website. If you use Windows 7, you need to save the setup.exe to your PC first, and then right-click the file, select Run

Network Connection

Before accessing a network camera (also known as IP Camera or IPC) from a PC, you need to connect the network
camera to the PC directly with a network cable or via a switch or router.
Use a Shielded Twisted Pair (STP) cable to connect the network interfaces of the network camera and the PC.
Use Shielded Twisted Pair (STP) cables to connect the network interfaces of the camera and the switch or router.

Login

Preparation
After you have completed the installation in accordance with the quick guide, connect the camera to power to start it.
After the camera is started, you can access the camera from a PC client installed with a web browser or the video
management software. Internet Explorer (IE) is a recommended web browser. Please contact your dealer to get the
video management software. Please refer to the user manual of video management software for detailed information.
The following takes IE on a Microsoft Windows 7.0 operating system as an example.
Check before login
The camera is operating correctly.
The network connection between the PC and the camera is normal.
The PC is installed with Internet Explorer 8.0 or higher.
(Optional) The resolution is set to 1440 x 900.
Add the IP address as a trusted site
Follow the illustrations bellow:
Click Download to install Active X.
as administrator, and then install it according to instructions.
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fex seriesFex22b4k-rnp2

Table of Contents