Set Communication - ADF Web HD67627-A1 User Manual

Industrial Electronic Devices

SET COMMUNICATION:

This section defines the fundamental communication parameter of two buses, S7comm and
EtherNet/IP.
By pressing the "Set Communication" button from the main window of SW67627 (Fig. 2)
the window "Set Communication" appears (Fig. 3).
The means of the fields for "Ethernet Connection" are:
In the field "Device Name
is defined;
If the field "Obtain
Connection)" is checked, DHCP for LAN connection is enabled;
If the field "Enable DNS" is checked, DNS protocol is enabled;
In the field "Primary DNS" the IP Address of the primary DNS server is defined;
In the field "Secondary
defined.
The means of the fields for "S7comm" are:
In the fields "IP ADDRESS" the IP address for S7comm side of the converter is
defined;
In the fields "SUBNET
defined;
In the fields "GATEWAY" the default gateway of the net is defined. This feature can
be enabled or disabled pressing the Check Box field. This feature is used for going
out of the net.
ADFweb.com S.r.l.
(Hostname)" the Hostname to assign to the converter
an IP Address Automatically
DNS" the IP Address of the secondary DNS server is
Mask" the SubNet Mask for S7comm side of the converter is
User Manual S7comm / EtherNet/IP Slave
Document code: MN67627_ENG
(DHCP for Cable
Figure 3: "Set Communication" window
Revision 1.000 Page 15 of 30