Table of Contents
Advertisement
User Manual S7comm / EtherNet/IP Slave
Document code: MN67627_ENG
Revision 1.000
Page 11 of 30
Industrial Electronic Devices
USE OF COMPOSITOR SW67627:
To configure the Converter, use the available software that runs with Windows called SW67627. It is downloadable on the site
www.adfweb.com and its operation is described in this document. (This manual is referenced to the last version of the software present on
our web site). The software works with MSWindows (XP, Vista, Seven, 8, 10; 32/64bit).
When launching the SW67627, the window below appears (Fig. 2).
Note:
It is necessary to have installed .Net Framework 4.
Figure 2: Main window for SW67627
ADFweb.com S.r.l.
Advertisement
Table of Contents
