Table of Contents
Advertisement
Positioning the screen and projector
1. Install the screen, ensuring that it is in the best position for viewing by your
audience.
2. Mount the projector, ensuring that it is at a suitable distance from the screen for the
image to fill the screen. Set the adjustable feet so that the projector is level, and
perpendicular to the screen.
The drawing shows the positions of the feet for table mounting, and the fixing holes for
ceiling mounting.
1. Four adjustable feet
2. Four M10 holes for ceiling mount The screws should not penetrate more than 15
mm into the body of the projector.
Installation & Quick Start Guide
Positioning the screen and projector
1
2
2
1
Digital Projection Ltd. Titan Laser WUXGA
Notes
Always allow the
projector to cool for 5
minutes before
disconnecting the power
or moving the projector.
Ensure that there is at
least 50 cm (19.7 in) of
space between the
1
ventilation outlets and
any wall, and 30 cm (11.8
in) on all other sides.
2
Do not use the threaded
holes for the adjustable
feet to hang or mount the
projector.
2
1
Rev B September 2019
page 21
Advertisement
Table of Contents
