Positioning The Screen And Projector - Digital Projection E-Vision Laser 15000 Series Instruction Manual

Digital Projection E-Vision Laser 15000 Series

Positioning the screen and projector

1. Install the screen, ensuring that it is in the best position for viewing by your audience.
2. Mount the projector, ensuring that it is at a suitable distance from the screen for the
image to fill the screen. Set the adjustable feet so that the projector is level, and
perpendicular to the screen.
The drawing shows the positions of the feet for
table mounting, and the fixing holes for ceiling
mounting.
1. Four adjustable feet
2. Six M4 holes for ceiling mount
The screws should not penetrate more
than 16 mm into the body of the
projector.
Do not use the threaded holes for the
adjustable feet to hang or mount the
projector.
Rev B April 2021
page 26
1
.
2
.
Positioning the screen and projector
1
2
2
2
1
Important Information
1
2
2
2
1