Table of Contents
Advertisement
Basic Operating Instructions
Basic Operating Instructions
Positioning the screen and projector
1. Install the screen, ensuring that it is in the best position for viewing by your audience.
2. Mount the projector, ensuring that it is at a suitable distance from the screen for the
image to fill the screen. Set the adjustable feet so that the projector is level, and
perpendicular to the screen.
The drawing shows the positions of the feet for
table mounting, and the fixing holes for ceiling
mounting.
1. Two adjustable feet
2. Seven M4 holes for ceiling mount.
The screws should not penetrate more
than 8 mm into the body of the
projector.
Do not use the threaded holes for the
adjustable feet to hang or mount the
projector.
Connecting the power supply
1. Firmly push the mains connector into
the AC In socket
Use only the power cable provided.
Ensure that the power outlet includes a
ground connection as this equipment MUST
be earthed.
Handle the power cable carefully and avoid
sharp bends. Do not use a damaged power
cable.
Important Information
1
Digital Projection E-Vision Laser 5900 Series
1
2
2
2
1
Rev B September 2020
1
page 23
Advertisement
Table of Contents
