Table of Contents
Advertisement
Digital Projection E-Vision Laser WQ120 Series
Positioning The Screen And Projector
1.
Install the screen, ensuring that it is in the best position for viewing by your audience.
2.
Mount the projector, ensuring that it is at a suitable distance from the screen for the image to fill the screen. Set the adjustable feet so that
the projector is level, and perpendicular to the screen.
The drawing below shows the positions of the feet for table mounting, and the fixing holes for ceiling mounting.
1
Four adjustable feet
2
Six M4 holes for ceiling mount
The screws should not penetrate more than 15 mm into the body of the projector.
1
2
2
2
1
Installation and Quick-Start Guide
POSITIONING THE SCREEN AND PROJECTOR
1
2
2
2
1
Notes
Always allow the projector
to cool for 5 minutes before
disconnecting the power or
moving the projector.
Ensure that there is at least 50
cm (19.7 in) of space between the
ventilation outlets and any wall,
and 30 cm (11.8 in) on all other
sides.
Rev A May 2018
page 12
Advertisement
Table of Contents
