Failure Code [Df10Ka] Travel Speed Range Selector Switch: Disconnection/Ground Fault - Komatsu WA250-6 Shop Manual

360 Troubleshooting by failure code (Display of code), Part 6

Failure code [DF10KA] Travel speed range selector switch: Disconnection/Ground fault

Failure code [DF10KA] Travel speed range selector switch:
Disconnection/Ground fault
Action code Failure code
E01 DF10KA
Contents of
• Travel speed range selector switch signal is not input because of disconnection or ground fault in
trouble
travel speed range selector switch input signal system.
Action of • Fixes gear to speed range before error occurrence.
controller
• If trouble disappears, system resets itself.
• Once starting switch is turned OFF, gear speed is assumed to be 4th for control, regardless of
selected speed range.
Problem that
appears on
• Gear is not set in selected speed range.
machine
• Indicator displays range before error occurrence.
(Once starting switch is turned OFF, 4th gear is displayed)
Related
• Method of reproducing failure code: Turn starting switch ON + Operate speed range selector switch.
information
Defective travel speed range
1 selector switch (Internal
defect)
Possible causes
and standard
value in normal
state
Defective travel speed range
2 selector resistor (Internal
defect)
WA250, 250PZ-6
Travel speed range selector switch: Disconnection/Ground fault
Trouble
(HST controller system)
Causes
a Prepare with starting switch OFF, then carry out troubleshooting
without turning starting switch ON.
Between (1) – (2)
Between (1) – (3)
Between (1) – (4)
Between (2) – (3)
Between (2) – (4)
Between (3) – (4)
a Prepare with starting switch OFF, then carry out troubleshooting
without turning starting switch ON.
Standard value in normal state/Remarks on troubleshooting
L03 (female) Switch position
Other than above
Other than above
– (Anytime)
– (Anytime)
L70 (male)
Between (1) – (5)
Between (2) – (6)
Between (3) – (7)
Between (4) – (8)
SEN03846-00
Resistance
2nd Max. 1 z
Min. 1 Mz
1st Min. 1 Mz
2nd Min. 1 Mz
3rd Max. 1 z
4th Max. 1 z
Max. 1 z
4th
Min. 1 Mz
Min. 1 Mz
Min. 1 Mz
1st Max. 1 z
2nd Min. 1 Mz
3rd Min. 1 Mz
4th Max. 1 z
Resistance
100 z ± 1%
220 z ± 1%
330 z ± 1%
470 z ± 1%
40-360
1
3