Removal And Installation Of Operator's Cab Glass (Stuck Glass) - Komatsu WA250-6 Shop Manual

700 Cab and its attachments

Removal and installation of operator's cab glass (Stuck glass)

Removal and installation of
operator's cab glass (Stuck glass)
Special tools
Symbol Part No.
1 793-498-1120 Clear plate
1 2 793-498-1130 Plate
X
3 793-498-1110 Magnet
793-498-1210 Lifter
2
(Suction cups)
Removal
a All sides of each glass of the operator's cab of
this machine are stuck.
a Remove the window glass to be replaced
according to the following procedure.
1. Using seal cutter [1], cut the adhesive between
broken window glass (1) and operator's cab
(2).
WA250, 250PZ-6
Part Name
t 2
t 2
t 2
t 2
a If the glass is narrow, you may cut the
adhesive by the following method. Insert
a fine wire [2] (piano wire, etc.) in the
adhesive and grip its both ends with priors
[3], etc. (or hold them by winding them
onto something) and cut the adhesive with
the wire.
a The broken
removed with knife [4] and a screwdriver.
(If the screwdriver is applied directly to the
normal window glass, the glass will be
broken.)
a When using knife [4], insert a screwdriver
in the cut to widen it and move the knife
forward.
2. Remove the window glass.
SEN03858-00
window glass may
50-700
be
7