Adjusting Replaced, Reassembled Or Added Sensor, Controller, Etc. With Machine Monitor - Komatsu WA250-6 Shop Manual

130 Testing and adjusting, Part 3

Adjusting replaced, reassembled or added sensor, controller, etc. with machine monitor

Adjusting replaced, reassembled or added sensor, controller, etc. with
machine monitor
1. Items to be set when sensor or controller is replaced, reassembled or added
a If any of the following components and parts is replaced or reassembled, initialize the sensors,
solenoids, etc. with the machine monitor.
a
Adjust the items in alphabetical order (A –) with the machine monitor.
Replaced, reassembled, or added component or option
Machine monitor
HST controller
Change of tire size
Addition or removal of option
Adjustment item
A
B
C
*1: Description No. of "Service mode" in "Special functions of machine monitor (EMMS)"
WA250, 250PZ-6
Contents of adjustment
Selection of machine model
Selection of option
Inputting of machine serial No.
SEN03838-00
1
Adjustment item
A, B, C
A, B
B
B
Description No.
12 (*1)
10 (*1)
11 (*1)
3
30-130