110 Testing and adjusting, Part 1
Handling controller voltage circuit
Handling controller voltage circuit
1.
When disconnecting or connecting a connector
between the engine controller and engine, be
sure to turn the starting switch OFF.
2.
If a T-adapter is inserted in or connected to a
connector between the engine controller and
engine for troubleshooting, do not start the
engine.
a You may turn the starting switch to the
OFF or ON position but must not turn it to
the START position.
WA250, 250PZ-6
Check of muffler and muffler
stack for looseness and damage
1.
Check the muffler and muffler stack visually for
a crack and damage. If any part is damaged,
replace it.
2.
Check the mounting bolts and nuts of the muf-
fler and muffler stack for looseness. If they are
loosened, retighten them.
SEN03836-01
1
33
30-110