Starting Wireless Setup Tool - Fujitsu ScanSnap ix500 Wi-Fi Connection Manual
Windows
Hide thumbs
Also See for ScanSnap ix500:
- Operator's manual (485 pages) ,
- Advanced operation manual (153 pages) ,
- Operating instructions manual (143 pages)
Table of Contents
Advertisement
Starting Wireless Setup Tool
Using ScanSnap Wireless Setup Tool allows you to set up a wireless network at any time to connect
the ScanSnap to a wireless LAN. When you install ScanSnap Manager, ScanSnap Wireless Setup
Tool is installed at the same time.
Start ScanSnap Wireless Setup Tool in the following procedure:
1.
Connect the ScanSnap and the computer with a USB cable.
2.
Open the ADF paper chute (cover) of the ScanSnap to turn the power on, and
then turn on the Wi-Fi switch on the back of the ScanSnap.
3.
Select [Start] menu → [All Programs] → [ScanSnap Manager] → [ScanSnap
Wireless Setup Tool] (for Windows 8.1/Windows 8, select [ScanSnap
Manager] → [ScanSnap Wireless Setup Tool] on the All apps screen).
The ScanSnap Wireless Setup Tool will start running.
HINT
For details about ScanSnap Wireless Setup Tool, refer to the ScanSnap Wireless Setup Tool Help.
41
Network Connection
Hide quick links:
Advertisement
Table of Contents
