R&S SMCVB-K157 User Manual page 69

®
R&S SMCVB-K157
Example:
Manual operation:
:SYSTem:COMMunicate:BCIP<hw>:NETWork:PROTocol <Protocol>
Specifies the network protocol.
Parameters:
<Protocol>
Example:
Manual operation:
:SYSTem:COMMunicate:BCIP<hw>:NETWork:RESTart
Triggers a restart of the network.
Example:
Usage:
Manual operation:
:SYSTem:COMMunicate:BCIP<hw>:NETWork:STATus <NetworkStatus>
Queries the network connection state.
Parameters:
<NetworkStatus>
Example:
Manual operation:
User Manual 1179.4686.02 ─ 01
See Example "Retrieving information on local network-related
settings" on page 67.
See "MAC Address" on page 35
UDP
*RST: UDP
See Example "Retrieving information on local network-related
settings" on page 67.
See "Protocol" on page 35
See Example "Retrieving information on local network-related
settings" on page 67.
Event
See "Restart Network"
1 | ON | 0 | OFF
*RST: n.a. (no preset. default: 0)
See Example "Retrieving information on local network-related
settings" on page 67.
See "Network Status" on page 33
Remote-control commands
on page 34
BCIP subsystem
69