R&S SMCVB-K157 User Manual page 27

®
R&S SMCVB-K157
Start [hh:mm:ss.fff]
Sets the start position in the loaded player file. Data which chronologically precedes
the start position is not replayed by the player.
The entered time stamp must chronologically always precede the entry under Stop.
Remote command:
:TSGen:CONFigure:SEEK:STARt
Position Player [hh:mm:ss.fff]
Displays the current play position in the file.
Remote command:
:TSGen:CONFigure:SEEK:POSition
Stop [hh:mm:ss.fff]
Sets the end position in the player file. Data which chronologically follows the end posi-
tion is not replayed by the player.
When the player reaches the "Stop" position, it returns to the "Start" position (continu-
ous play).
The entered time stamp must chronologically always follow the entry under Play.
Remote command:
:TSGen:CONFigure:SEEK:STOP
Reset Window
Resets "Start/Stop/Position Player" parameters.
Remote command:
:TSGen:CONFigure:SEEK:RESet
Play
Plays the selected file.
For supported file types, see
Remote command:
:TSGen:CONFigure:COMMand
Pause
Pauses the player.
After pausing, you can resume playing the file by clicking "Play" again.
Remote command:
:TSGen:CONFigure:COMMand
Stop
Stops the player and returns to the start position.
Remote command:
:TSGen:CONFigure:COMMand
User Manual 1179.4686.02 ─ 01
DVB-C configuration and settings
on page 64
on page 63
on page 64
on page 64
Table 3-2.
on page 61
on page 61
on page 61
TS player
27