How To Generate An Internal Ts Signal - R&S SMCVB-K157 User Manual

®
R&S SMCVB-K157
You can further specify the payload of the stuffing data, see "Test Signal > Payload
Test/Stuff."
The R&S SMCV100B is prepared for receiving TS data, that is input at the "User 1"
connector.
Monitor TS data stream properties in the "Info" side tab, see
monitor an external TS input

4.1.3 How to generate an internal TS signal

To play a TS file with the "TS Player"
1. Select "Input Signal > Source > TS Player".
The "TS Player" button appears below.
2. Click "TS Player".
The "TS Player" dialog for playing TS data files opens.
3. Click "Play" to play the default file DIVER.trp.
Playing the file requires no option.
To play a file of stream library with the "TS Player"
1. Download the
2. Select "Input Signal > Source > TS Player".
The "TS Player" button appears below.
3. Click "TS Player".
The "TS Player" dialog for playing TS data files opens.
4. Click "Play" to play the default file DIVER.trp.
User Manual 1179.4686.02 ─ 01
Performing DVB-C signal generation tasks
signal", on page 42.
Configuring the input signal
Chapter 4.2.2, "How to
40