R&S SMCVB-K157 User Manual page 68

®
R&S SMCVB-K157
:SYSTem:COMMunicate:BCIP<hw>:NETWork:COMMon:HOSTname <Hostname>
Sets an individual hostname for the vector signal generator.
Note:We recommend that you do not change the hostname to avoid problems with the
network connection. If you change the hostname, be sure to use a unique name.
Parameters:
<Hostname>
Example:
Manual operation:
:SYSTem:COMMunicate:BCIP<hw>:NETWork:IPADdress
Sets the IP address.
Example:
Manual operation:
:SYSTem:COMMunicate:BCIP<hw>:NETWork:IPADdress:MODE <IPMode>
Selects manual or automatic setting of the IP address.
Parameters:
<IPMode>
Example:
Manual operation:
:SYSTem:COMMunicate:BCIP<hw>:NETWork:IPADdress:SUBNet:MASK
Sets the subnet mask.
Example:
Manual operation:
:SYSTem:COMMunicate:BCIP<hw>:NETWork:MACaddress <MACAddress>
Queries the MAC address of the network adapter.
Parameters:
<MACAddress>
User Manual 1179.4686.02 ─ 01
string
See Example "Retrieving information on local network-related
settings" on page 67.
See "Hostname" on page 34
See Example "Retrieving information on local network-related
settings" on page 67.
See "IP Address" on page 34
AUTO | STATic
*RST: AUTO
See Example "Retrieving information on local network-related
settings" on page 67.
See "Address Mode" on page 34
See Example "Retrieving information on local network-related
settings" on page 67.
See "Subnet Mask" on page 35
string
Range: 00:00:00:00:00:00 to ff:ff:ff:ff:ff:ff
Remote-control commands
BCIP subsystem
68