General Commands - R&S SMCVB-K157 User Manual

®
R&S SMCVB-K157

5.1 General commands

Example: Saving current configuration
SOURce1:BB:DVBC:SETTing:STORe "/var/user/my_dvbc"
// Saves the file "my_dvbc.dvbc" in the directory as above.
*RST
SOURce1:BB:DVBC:SETTing:CATalog?
// Response: "my_dvbc"
SOURce1:BB:DVBC:SETTing:LOAD "/var/user/my_dvbc"
SOURce1:BB:DVBC:SETTing:DELete "my_dvbc"
SOURce1:BB:DVBC:SETTing:STATe 1
[:SOURce<hw>]:BB:DVBC:STATe
[:SOURce<hw>]:BB:DVBC:PRESet
[:SOURce<hw>]:BB:DVBC:SETTing:STORe
[:SOURce<hw>]:BB:DVBC:SETTing:LOAD
[:SOURce<hw>]:BB:DVBC:SETTing:DELete
[:SOURce<hw>]:BB:DVBC:SETTing:CATalog?
[:SOURce<hw>]:BB:DVBC:STATe <State>
Enables/disables the DVB-S standard.
Parameters:
<State>
Example:
Manual operation:
[:SOURce<hw>]:BB:DVBC:PRESet
Sets the parameters of the digital standard to their default values (*RST values speci-
fied for the commands).
Not affected is the state set with the command SOURce<hw>:BB:DVBC:STATe.
Setting parameters:
<Preset>
Example:
Usage:
Manual operation:
[:SOURce<hw>]:BB:DVBC:SETTing:STORe <Save>
Saves the current settings into the selected file; the file extension (*.dvbc) is
assigned automatically.
User Manual 1179.4686.02 ─ 01
......................................................................................44
................................................................................... 44
.......................................................................44
.........................................................................45
.......................................................................45
....................................................................45
1 | ON | 0 | OFF
*RST: 0
See Example "Saving current configuration"
See "State" on page 10
select
See Example "Saving current configuration"
Event
See "Set To Default" on page 10
Remote-control commands
General commands
on page 44.
on page 44.
44