R&S SMCVB-K157 User Manual page 49

®
R&S SMCVB-K157
********************************************************************************
SOURce1:BB:DVBC:SOURce EXT
SOURce1:BB:DVBC:INPut IP
// You can query input signal properties for one IP TS channel only.
// Query properties for, e.g., IP TS channel 2.
SOURce1:BB:DVBC:INPut:TSCHannel 2
SOURce1:BB:DVBC:PACKetlength?
// Response: "P188"
SOURce1:BB:DVBC:USEFul:RATE:MAX?
// Response in MBit/s: "432.109876"
SOURce1:BB:DVBC:INPut:DATarate?
// Response in MBit/s: "400.000000"
SOURce1:BB:DVBC:INPut:DATArate?
// Response in MBit/s: "399.876543"
********************************************************************************
// Query properties of internal TS player input signals.
********************************************************************************
SOURce1:BB:DVBC:SOURce TSPL
SOURce1:BB:DVBC:USEFul:RATE:MAX?
// Response in MBit/s: "19.392659"
SOURce1:BB:DVBC:USEFul:RATE?
// Response in MBit/s: "17.654321"
For configuring IP channel settings and local IP data network parameters, see:
●
Chapter 5.2.4, "IP
●
Chapter 5.6, "BCIP
[:SOURce<hw>]:BB:DVBC:PACKetlength?
[:SOURce<hw>]:BB:DVBC:USEFul[:RATE]:MAX?
[:SOURce<hw>]:BB:DVBC[:INPut]:DATarate?
[:SOURce<hw>]:BB:DVBC:USEFul[:RATE]?
[:SOURce<hw>]:BB:DVBC:PACKetlength?
Queries the packet length of the external transport stream in bytes.
Return values:
<InpSigPLength>
Example:
Usage:
Manual operation:
User Manual 1179.4686.02 ─ 01
subsystem", on page 53
subsystem", on page 67
......................................................................... 49
..................................................................... 50
.......................................................................50
P188 | P204 | INValid
P188|P204
188/204 byte packets specified for serial input and parallel input.
INValid
Packet length does not match the specified length.
See Example "Configuring general input signal properties"
on page 46.
Query only
See "Packet Length" on page 15
Remote-control commands
...............................................................50
Input commands
49