®
R&S
SMCVB-K157
3 DVB-C configuration and settings
Access:
► Select "Baseband > DVB-C".
The remote commands required to define these settings are described in
"Remote-control
Settings:
●
General
●
Input Signal
●
Coding
●
Special
●
Global connector
●
TS
●
Local IP data network
3.1 General settings
Access:
► Select "Baseband > DVB-C".
This tab provides functionality for calling default settings, save and recall settings.
Settings:
State..............................................................................................................................10
Set To
Save/Recall................................................................................................................... 11
State
Activates the standard and deactivates all the other digital standards and digital modu-
lation modes in the same path.
Remote command:
[:SOURce<hw>]:BB:DVBC:STATe
Set To Default
Calls the default settings. The values of the main parameters are listed in the following
table.
User Manual 1179.4686.02 ─ 01
commands",
settings...................................................................................................... 10
settings................................................................................................ 11
settings....................................................................................................... 21
settings.......................................................................................................22
settings........................................................................................23
player.................................................................................................................23
settings................................................................................ 33
Default................................................................................................................10
DVB-C configuration and settings
on page 43.
on page 44
General settings
Chapter 5,
10