R&S SMCVB-K157 User Manual page 18

®
R&S SMCVB-K157
4. Select "Input Signal > IP Channel x"
The tab provides settings to configure IP channel x.
You can configure settings for 4 IP channels x = 1 to 4 individually, see also "Input
Signal > General > IP TS Channel".
IP channel settings affect input IP data of the local IP data network. The settings are
independent from the used broadcast standard configuration.
Saving/recalling a certain IP channel or local IP data network configuration is not possi-
ble via the broadcast standard-specific functionality.
Use the global save/recall functionality instead, see section "Saving and Recalling
Instrument Settings" in the R&S SMCV100B user manual.
The table below shows the availability of the tab in the broadcast standard configura-
tion.
Table 3-1: IP channel configuration support in broadcast standards
Baseband standard
"ATSC/ATSC-M/H"
"ATSC 3.0"
"DTMB"
"DVB-T"
"DVB-T2"
"ISDB-T"
"T-DMB/DAB"
See also:
●
Chapter 4.1.1, "How to apply an external IP input
●
Chapter 3.7, "Local IP data network
User Manual 1179.4686.02 ─ 01
"IP Channel x" Baseband standard
Yes "DVB-S"
No "DVB-S2"
Yes "DVB-C"
Yes "J.83/B"
Yes "DRM"
Yes "Audio AM"
Yes "Audio FM"
settings",
DVB-C configuration and settings
Input Signal settings
"IP Channel x"
Yes
Yes
Yes
Yes
No
No
No
signal", on page 36
on page 33
18