Table of Contents
Advertisement
®
R&S
SMCVB-K157
//********************************************************************************
SOURce1:BB:INPut:IP2:TYPe UNI
// Local IP data interface is configured for Unicast reception
SOURce1:BB:INPut:IP2:PORT 6002
//********************************************************************************
// Define multicast properties.
//********************************************************************************
SOURce1:BB:INPut:IP2:TYPe MULT
// Local IP data interface is configured for Multicast reception
SOURce1:BB:INPut:IP2:MULTicast:ADDRess?
// Response: "226.0.0.0"
SOURce1:BB:INPut:IP2:IGMP:SOURce:ADDRess?
// Response: "0.0.0.0"
SOURce1:BB:INPut:IP2:IGMP:SOURce:ADDRess "192.168.10.1"
SOURce1:BB:INPut:IP2:IGMP:SOURce:PING
SOURce1:BB:INPut:IP2:IGMP:SOURce:RESult?
// Response: "Ping: Successful"
Commands
[:SOURce<hw>]:BB:INPut:IP<ch>[:STATe] <Alias>
Activates/deactivates the "IP Channel x" as IP input.
Specify the current IP TS Channel with the command
SOURce1:BB:DigStd:INPut:TSCHannel. DigStd stands for the IP TS Channel in
the corresponding broadcast standard.
Parameters:
<Alias>
Example:
Manual operation:
[:SOURce<hw>]:BB:INPut:IP<ch>:ALIas <Alias>
Specifies an alias, i.e. name for the IP connection.
Parameters:
<Alias>
User Manual 1179.4686.02 ─ 01
..........................................................................54
............................................................................ 54
............................................................................55
............................................................................ 55
1 | ON | 0 | OFF
*RST:
0
See
Example "Configure IP channel 2 properties"
See
"Input IP"
on page 19
string
Remote-control commands
Input commands
....................................................... 55
..............................................56
.................................................... 56
................................................ 56
on page 53.
54
Advertisement
Chapters
Table of Contents
