Protocol; Subnet Mask; Show Connector; Mac Address - R&S SMCVB-K157 User Manual

®
R&S SMCVB-K157

Protocol

Sets the protocol type of the input IP data.
The current firmware supports
Remote command:
:SYSTem:COMMunicate:BCIP<hw>:NETWork:PROTocol

Subnet Mask

Displays the bit group of the subnet in the host identifier.
To assign the subnet mask manually, select "Address Mode > Static".
Remote command:
:SYSTem:COMMunicate:BCIP<hw>:NETWork:IPADdress:SUBNet:MASK
on page 68

Show Connector

Accesses a dialog that displays the physical location of the selected connector on the
front/rear panel of the instrument.

MAC Address

Displays the MAC address, a unique identifier of the network adapter in the
R&S SMCV100B.
Remote command:
:SYSTem:COMMunicate:BCIP<hw>:NETWork:MACaddress
User Manual 1179.4686.02 ─ 01
DVB-C configuration and settings
UDP and UDP/RTP.
Local IP data network settings
on page 69
on page 68
35