R&S SMCVB-K157 User Manual page 29

®
R&S SMCVB-K157
Packet Length
Requires a *.trp, *.trp_c, *.emc or *.emc_c file loaded into the "TS Player" dia-
log. *.trp files are previously recorded files.
Displays the packet length of the loaded TS player file.
Remote command:
:TSGen:CONFigure:PLENgth
Nullpacket Stuffing
Requires a *.trp, *.trp_c, *.emc or *.emc_c file loaded into the "TS Player" dia-
log. *.trp files are previously recorded files.
Activates nullpacket stuffing.
By default nullpacket stuffing is deactivated. The output data rate of the TS player
equals the original data rate as defined in the TS player file. Equal rates ensure that
the time references in the tables of the played TS stream are correct during replay.
"On"
"Off"
Remote command:
:TSGen:CONFigure:STUFfing
Stop Data
Requires a *.trp, *.trp_c, *.emc or *.emc_c file loaded into the "TS Player" dia-
log. *.trp files are previously recorded files.
Ensures that a standardized TS data stream is always output at the TS output at the
rear of the R&S SMCV100B.
In pause or stop status, the TS generator generates "test packets", which have data
and header parts, that can be configured using the
Remote command:
:TSGen:CONFigure:STOPdata
User Manual 1179.4686.02 ─ 01
on page 62
Activate stuffing, if you need a higher rate than the original data rate.
Null packets are inserted into the data stream.
To ensure correct time references in the stream tables, activate pro-
gram clock reference correction. See
Deactivate stuffing, if you want to use the same data rate as the origi-
nal data rate.
on page 65
on page 65
DVB-C configuration and settings
"PCR, DTS/PTS"
Test TS Packet.
TS player
on page 32.
29