R&S SMCVB-K157 User Manual page 24

®
R&S SMCVB-K157
To access and download a stream library file
The steps to access a stream library and to download stream library files is analogous
as for waveform libraries. See chapter "How to Work with Waveform Libraries" in the
R&S SMCV100B user manual.
For information on the content of a stream library, see the user manual of the stream
library at:
www.rohde-schwarz.com/manual/smcv100b/ksxx-kvxx-stream-and-waveform-libraries-
user-manuals-manuals-gb1_78701-972224.html
To access the "TS Player" application
1. Select "Baseband > DVB-C > Input Signal".
2. Select "Source > TS Player".
3. Select "TS Player" button.
Opens the TS player dialog, where you can load files.
Support in broadcast standard configuration
Various broadcast baseband standards of the R&S SMCV100B support the "TS
Player" application. For an overview, see the table below.
Baseband standard
"ATSC/ATSC-M/H"
"ATSC 3.0"
"DTMB"
"DVB-T"
"DVB-T2"
"ISDB-T"
"T-DMB/DAB"
The remote commands required to define these settings are described in
"TSGen
Settings:
● TS Player
● Player output
● Seamless loop
User Manual 1179.4686.02 ─ 01
"Source > TS Player"
Yes
Yes
Yes
Yes
Yes
Yes
Yes
subsystem", on page 59.
settings................................................................................................... 25
settings..............................................................................................28
settings........................................................................................... 31
DVB-C configuration and settings
Baseband standard "Source > TS Player"
"DVB-S" Yes
"DVB-S2" Yes
"DVB-C" Yes
"J.83/B" Yes
"DRM" No
"Audio AM" No
"Audio FM" No
TS player
Chapter 5.5,
24