Special Commands - R&S SMCVB-K157 User Manual

®
R&S SMCVB-K157

5.4 Special commands

Example: Configuring special settings
********************************************************************************
// Query standard-compliant configuration.
********************************************************************************
SOURce1:BB:DVBC:SPECial:REEDsolomon?
// Response: "1"
// Standard-compliant configuration implies an active Reed Solomon encoder.
SOURce1:BB:DVBC:SPECial:SETTings:STATe?
// Response: "0"
// Standard-compliant configuration implies disabled special settings.
********************************************************************************
// Set non-standard configuration.
********************************************************************************
SOURce1:BB:DVBC:SPECial:REEDsolomon 0
SOURce1:BB:DVBC:SPECial:SETTing:STATe 1
[:SOURce<hw>]:BB:DVBC[:SPECial]:SETTing[:STATe]
[:SOURce<hw>]:BB:DVBC[:SPECial]:REEDsolomon
[:SOURce<hw>]:BB:DVBC[:SPECial]:SETTing[:STATe] <SpecialState>
Enables/disables special settings.
The setting allows you to switch between standard-compliant and user-defined channel
coding.
Parameters:
<SpecialState>
Example:
Manual operation:
[:SOURce<hw>]:BB:DVBC[:SPECial]:REEDsolomon <ReedSolomon>
Enables/disables the Reed-Solomon encoder.
Parameters:
<ReedSolomon>
Example:
Manual operation:
User Manual 1179.4686.02 ─ 01
1 | ON | 0 | OFF
*RST: 0
See Example "Configuring special settings"
See "Special Settings"
1 | ON | 0 | OFF
*RST: 1
See Example "Configuring special settings"
See "Reed Solomon" on page 22
Remote-control commands
Special commands
........................................................58
...........................................................58
on page 58.
on page 22
on page 58.
58