R&S SMCVB-K157 User Manual page 52

®
R&S SMCVB-K157
[:SOURce<hw>]:BB:DVBC:TSPacket <SetTSPacket>
Specifies the structure of the test transport stream packet that is fed to the modulator.
Parameters:
<SetTSPacket>
Example:
Manual operation:
[:SOURce<hw>]:BB:DVBC:PIDTestpack <SetPIDTestpack>
If a header is present in the test packet ("Test TS Packet > Head/184 Payload"), you
can specify a fixed or variable packet identifier (PID).
Parameters:
<SetPIDTestpack>
Example:
Manual operation:
[:SOURce<hw>]:BB:DVBC:PID <SetPID>
Sets the PID.
Parameters:
<SetPID>
Example:
Manual operation:
[:SOURce<hw>]:BB:DVBC:PAYLoad <SetPayload>
Defines the payload area content of the
Parameters:
<SetPayload>
User Manual 1179.4686.02 ─ 01
H184 | S187
H184
Head/184 Payload
S187
Sync/187 Payload
*RST: H184
See Example "Configuring test signal properties"
See "Test TS Packet" on page 16
NULL | VARiable
*RST: NULL
See Example "Configuring test signal properties"
See "PID Test Packet"
integer
Range: 0 to 8191
*RST: 8191
See Example "Configuring test signal properties"
See "PID (Hex)" on page 17
TS packet.
PRBS | H00 | HFF
PRBS
PRBS data in accordance with
H00
Exclusively 00 (hex) data
Remote-control commands
on page 17
ITU-T O.151
Input commands
on page 51.
on page 51.
on page 51.
52