Check Regulation Upper And Lower Unit; Check Date And Time; Check Error Messages - Henny Penny FlexFusion ELECTRIC SPACESAVER PLUS TEAM Maintenance Manual

Action
• Close the unit (see "Opening and closing the unit").

8.15 Check regulation upper and lower unit,

Check date and time

Test criteria
• Date and time are current.
If No
Replace the battery of the control panel.
Action
• Set date / time.
8.15.1 Check date and time
Prerequisite The unit is ready for use

8.15.2 Check error messages

Prerequisite The unit is ready for use
Action
• Clarify error indication in display with manufacturer.
• Inform operator.
INFORMATION
1. Switch on the voltage.
2. Switch on the unit.
3. Set the date and time.
4. Switch the unit off and then back on.
5. Check date and time.
If necessary: Replace buffer battery.
Voltage switched on
1. Switch on the unit.
2. No error message appears in the display:
Device is fine. Regulation works perfectly.
3. An error message appears in the display:
Document errors.
4. Switch off the unit.
Maintenance only possible to a limited extent.
Maintenance instructions
Performing maintenance
Remarks / values Yes No
33