H3Ba - Omron H3CR-A Manual

Solid-state Timer
DIN-sized (48 x 48, 45 x 75 mm) Timer
with 3 Selectors to Cover 64
Specifications
Sixteen selectable time ranges (0.05 s to 100 hrs).
Four operation modes switch-selectable.
External signal inputs for easy control of the timer
from a remote site.
A single LED indicator for both timing (RUN) and
time-up (UP).
Ordering Information
Operation/ resetting Operation mode
syste system
Time-limit operation/ ON-delay,
Repeat cycle,
self-resetting/external
resetting (see note 2) Signal ON-/OFF-delay,
or Signal OFF-delay or Signal OFF-delay
operation (selectable)
Time-limit operation/ ON-delay operation
self-resetting
Note: 1. Specify both the model number and supply voltage when ordering.
2. The operation/resetting system is dependent on the selected operation mode. For details, see "Timing charts (Operation Modes)".
Accessories (Order Separately)
Timer

H3BA

H3BA-8H/H3BA-8
Note: Track mounted socket can be used as a front connecting socket.
Top View
Replacements
H3BA
H3BA
H3BA-8
H3BA-8H
H3BA-FA
280
Terminal
11-pin round
socket
Front screw
8-pin round
socket
Track mounted socket
(see note 1) ( 1)
P2CF-11
P2CF-08
Bottom View
Replacement model
H3CR-A
H3CR-A8
H3CR-A8E(L)
H3DR-A
Time-limit Instantaneous
contact contact
DPDT ---
SPDT ---
SPDT SPDT
DPDT ---
Back connecting socket
Solder terminal
PL11
PL08
16
66
H3BA
RC+
Model
Surface/ Flush mounting
track mounting
H3BA (with H3BA (with
P2CF-11 socket) Y92F-30 adapter)
H3BA-FA ---
H3BA-8H (with H3BA-8H (with
P2CF-08 socket) Y92F-30 adapter)
H3BA-8 (with H3BA-8 (with
P2CF-08 socket) Y92F-30 adapter)
Screw terminal
P3GA-11
P3G-08
Reference page