Omron H3CR-A Manual page 206

H5CN
Backup Battery
Y92S-20
Installation
Connections
Power Supply Connection
Model Without Backup Power for Memory Protection
Connect the timer so that the required supply voltage can be applied
across terminals B and G.
Model With Backup Power for Memory Protection
Connect the timer so that the required supply voltage can be applied
across terminals B and J.
206
Connection of Battery Leads
With socket
P2CF-11
With socket
P3G-11
Connection of Load Circuit (Control Output)
Model With Backup Power for Memory Protection
Contact Output Type (H5CN-jN)
Terminals E, F, and H are for contact output contacts. Load 1 con-
nected in series with NO contact (between terminals F and H) is nor-
mally open, and the load circuit voltage will be applied after the lapse
of the set time. The load circuit voltage is normally applied to load B
conneted in series with NC contact (between terminals E and H),
which will be open after the lapse of the set time.
Terminal No. 1
Terminal No. 1
H5CN
Terminal No. 4
Terminal No. 4
Load circuit
voltage
(250 VAC
max.)