Omron H3CR-A Manual page 254

H5L
Nomenclature
LCD
Cycle Key
Key Operation
Key Name
Mode Key
Write Key
Plus Key
Minus Key
Cycle Key
Manual override
switch
254
Mode Key
Write Key
Plus Key
Minus Key
Manual override switch
Changes program mode
To write the set data using the Plus and/or Minus Key.
Reads out the set program.
Changes "day of week" while setting day of week.
Changes "hours" or "minutes" while setting current time.
When the Plus Key is held down, the displayed digit increments continuously; when the Minus Key
is held down, it decrements continuously. is held down, it decrements continuously.
When specifying output.
The Plus Key specifies output ON while the Minus Key specifies output OFF.
Note that if the same key is pressed twice, the output specification becomes invalid; neither ON nor
OFF is set.
Specifies the cycle program. Pressing this key twice causes the set cycle program to be cleared.
ON: Turns ON output regardless of program
RUN: Executes program
OFF: Turns OFF output regardless of program
First and second circuit can be operated independently.
Note: This figure shows the LCD section with all display items
being displayed on the screen.
Function
H5L