Track Color - Furuno NAVNET TZ2 TZTL12F Operator's Manual

For time-based intervals
1. Open the home screen, then tap [Settings]→[Ship & Track].
2. Tap [Track Interval]→[Time], then tap "<" to go back one layer.
3. Tap [Time Interval].
4. Tap a time interval.
5. Tap the close button on the title bar to finish.
For distance-based intervals
1. Open the home screen, then tap [Settings]→[Ship & Track].
2. Tap [Track Interval]→[Distance], then tap "<" to go back one layer.
3. Tap [Distance Interval]. The software keyboard appears.
4. Input the desired interval, then tap [].
5. Tap the close button on the title bar to finish.
2.11.4

Track color

Track can be displayed in a single color or multiple colors. For multiple colors, you can
display the track according to one of the conditions shown below.
- Depth
- SST Variation
- Bottom Discrimination
- Day of Week
Note: The bottom discrimination method requires a bottom discrimination capable
transducer connected to the bottom discrimination sounder BBDS1, or network
sounder DFF1-UHD.
From the home screen
1. Open the home screen, then tap [Settings]→[Ship & Track]→[Track Color].
2. Tap [Fixed] or [Variable]. Tap "<" to go back one layer. For [Fixed], go to the next
step. For [Variable], go to step 5.
- SST Range
- Speed
- Depth Variation
- Trip
2. CHART PLOTTER
2-19