Track Recording Interval; Track Color - Furuno TZTL12F Operator's Manual

2. PLOTTER
2.11.3

Track recording interval

In drawing the track, the position of your ship is stored into the memory of this unit at
an interval of time. A shorter interval provides better reconstruction of the track, but
the storage time of the track is reduced.
1. Open the home screen, then tap [Settings] - [Ship & Track].
2. Tap [Track Interval].
3. Tap a time interval.
4. Tap the close button to finish.
2.11.4

Track color

Track can be displayed in a single color or multiple colors. For multiple colors, you can
display the track according to one of the conditions shown below.
• Depth
• SST Range
• SST Variation
• Speed
• Bottom Discrimination
Note: The bottom discrimination method requires a bottom discrimination capable
transducer - bottom discrimination sounder BBDS1, or network sounder DFF1-UHD.
From the home screen
1. Open the home screen, then tap [Settings] - [Ship & Track].
2. Tap [Track Color].
3. Tap [Fixed] or [Variable]. Tap ">" to go back one layer. For [Fixed], go to the next
step. For [Variable], go to step 5.
4. Tap [Fixed Color Setup] then tap a color. Go to step 10.
2-18