How To Show Or Hide The Depth And Frequency Indications; Availability Of Points And Event Marks Registration, And Go To A Point - Furuno NAVNET TZ2 TZTL12F Operator's Manual

8.6.11

How to show or hide the depth and frequency indications

You can show or hide the depth and TX frequency at the bottom left corner of the
screen.
1. Open the Layers menu.
2. Select [ON] or [OFF] for [Depth Information].
8.6.12 Availability of points and event marks registration, and go to a
point
For how to register points and event marks, see section 4.2.
The table below shows function availability according to latitude/longitude, heading
data presence or absence. If there is no latitude/longitude data, none of the functions
below are available.
Item
Point registration
Go to point
Event mark registration
Item
Point registration
Go to point
Event mark registration
Latitude/Longitude / Heading data: YES
Fish
Yes
Yes
No
Latitude/Longitude: YES, Heading data: NO
Fish
No
No
No
8. MULTI BEAM SONAR DFF-3D
Other than Fish
Seabed
or Seabed
Yes
Yes
No
Other than Fish
Seabed
or Seabed
No
No
No
No
No
Yes
No
No
Yes
8-19