How To Export, Import Pbg Recordings - Furuno NAVNET TZ2 TZTL12F Operator's Manual

9. FILE OPERATIONS
How to import tracks
You can import the tracks stored on a media to the internal memory of this unit.
Note 1: Imported track is transfered to each NavNet TZtouch2 unit. Track cannot be
shared among units in the network.
Note 2: For TZT2BB configurations with dual monitors, tracks cannot be shared be-
tween the monitors.
1. Put media in port (slot).
2. From the Home screen, tap [Settings]→[Files]→[Import Tracks]. A list of tracks
stored in the media appears.
3. Tap the tracks file to import. You are asked if you are sure to import tracks.
4. Tap [OK]. The message "IMPORT SUCCEEDED" appears if the exporting was
successful.
5. Tap [OK].
6. Tap the close button on the title bar to finish.
9.5

How to Export, Import PBG Recordings

How to export PBG recordings
You can export PBG recordings to a media as follows.
1. Put formatted media in port (slot).
2. Open the Home screen, then tap [Settings]→[Files]→[Export PBG].
3. Tap the destination for the PBG recording. You are asked if you are sure to pro-
ceed.
4. Tap [OK]. The message "EXPORT SUCCEEDED" appears if the exporting was
successful.
5. Tap [OK] to erase the message.
6. Tap the close button on the title bar to finish.
Note: A PBG recording cannot be displayed on a NavNet TZ touch2 simply by insert-
ing a media into the unit. Do "How to import PBG recordings" to display a PBG record-
ing.
9-4
USB 1
XXXX. XXX.tzx
XXXX. XXX.tzx
XXXX. XXX.tzx
XXXX. XXX.tzx