Xte (Cross Track Error); Alarm; Trip Alarm - Furuno RD-30 Operator's Manual

5. If you turned on the alarm, press the [ENT] key and then use the cursor pad
to enter the alarm setting: Use ◄ or ► to select location, and press ▲ or ▼
to enter value.
6. Press the [ENT] key.
7. Press the [MENU] key twice to close the menu.
1.7.6 XTE (Cross Track Error) alarm
The XTE alarm, which requires the XTE data sentence, warns you when your
boat is off its intended course.
1. Press the [MENU] key once or twice to show the main menu.
2. Select ALARM2 and then press the [ENT] key.
3. Select XTE and then press the [ENT] key to show the XTE alarm options
window.
4. Select OFF or ON as appropriate and then press the [ENT] key.
5. For ON, press the [ENT] key and then use the cursor pad to enter the alarm
setting: Use ◄ or ► to select location, and press ▲ or ▼ to enter value.
6. Press the [ENT] key.
7. Press the [MENU] key twice to close the menu.
1.7.7

Trip alarm

The trip alarm informs you when you have traveled a certain distance.
1. Press the [MENU] key once or twice to show the main menu.
2. Select ALARM2 and then press the [ENT] key.
3. Select TRIP and then press the [ENT] key to show the trip alarm options
window.
4. Select OFF or ON as appropriate and then press the [ENT] key.
5. For ON, press the [ENT] key and then use the cursor pad to enter the alarm
setting: Use ◄ or ► to select location, and press ▲ or ▼ to enter value.
6. Press the [ENT] key.
7. Press the [MENU] key twice to close the menu.
Note: Speed through water must be more than 0.09 kt to calculate trip distance.
Intended
course

: Alarm

How the XTE alarm works
Destination
Alarm
waypoint
setting
1. OPERATION
1-19