How To Edit Boundaries - Furuno NAVNET TZ2 TZTL12F Operator's Manual

4. POINTS, BOUNDARIES
4. Tap respective item (Latitude, Longitude circle only), Radius (circle only), Name,
Comment, Color, Contour, Transparency to change its data.
5. Tap the close button on the title bar to finish.
4.17.5

How to edit boundaries

On-screen boundaries can be edited as shown in this section.
Note: The entire area boundary must be present on the display in order to display it.
Zoom to fit the boundary within the screen.
How to edit a boundary on the screen
1. Tap the boundary to edit to show the pop-up menu.
2. Tap [Edit] to show the Edit screen.
Go to step 3 to edit a circle, or go to step 7 to edit a line or area.
4-30
Edit screen for Area,
Line boundary
Edit screen for
Circle boundary