Sar Operations - Furuno NAVNET TZ2 TZTL12F Operator's Manual

5.12

SAR Operations

The SAR (Search And Rescue) feature facilitates search and rescue, and MOB (Man
Over Board) operations. This feature requires several installation menu changes and
requires a qualified technician to make the necessary menu changes. To active this
feature, contact your local dealer.
1. On the chart plotter display, tap the location where you want to start SAR opera-
tions.
2. On the pop-up menu, tap [New SAR Pattern].
3. Enter coordinates.Tap [Commence Search Point] to show the software key-
board. Input the coordinates for the starting location, then tap [].
4. Enter the length of the interval. Tap [SAR Track Spacing Setup] to show the
software keyboard. Set the distance between the SAR tracks, then tap [].
5. Tap [Starboard] or [Port] to select the direction in which to start the SAR pattern.
6. Tap the type of pattern you want to use. The following figures show examples for
each of the patterns.
5. ROUTES
5-21