Hitching And Disconnecting From Tractor; Pulling The Load Box On And Removing The Load Box From; The Trailer - PRONAR T386 Operator's Manual

SECTION 2

2.1.2 HITCHING AND DISCONNECTING FROM TRACTOR

• Do NOT hitch the trailer to tractor if the tractor does not fulfil the requirements
specified by the Manufacturer (minimum tractor power demand, wrong hitch, etc.)
– compare table (1.3) AGRICULTURAL TRACTOR REQUIREMENTS. Before
hitching trailer make certain that oil in external hydraulic system of tractor may be
mixed with the hydraulic oil of the trailer.
• Before hitching the trailer check that both machines are in good technical
condition.
• While connecting the trailer to the tractor, use the appropriate hitch. After
completing the hitching of the machines check the safety of the hitch Carefully
read the tractor Operator's Manual. If the tractor is equipped with an automatic
hitch, make certain that the coupling operation is completed.
• Be especially careful when hitching the machine.
• When hitching, there must be nobody between the trailer and the tractor.
• Do NOT proceed with disconnecting trailer from the tractor when tipping frame is
raised.
• Hitching and unhitching the trailer may only take place when the machine is
immobilised with the parking brake. If the trailer is positioned on a slope or
elevation it shall be additionally secured by the placing under the wheels of trailer
equipment chocks or other objects without sharp edges.
• The trailer must not be moved when the parking stand is extended and rests on
the ground. If moved there is a risk of damage to the parking stand.
• The trailer may not be unhitched from the tractor, if the tipping frame or central
frame are not fully retracted and when hydraulic cylinder suspension blocks are
extended.

2.1.3 PULLING THE LOAD BOX ON AND REMOVING THE LOAD BOX FROM

THE TRAILER

• Before pulling the load box on the trailer one must take off the slow-moving
vehicle warning sign.
2.3
Pronar T386