Standard Work - PRONAR T740 Manual

TIP
Power supply and signal lead plugs are so designed that it is impossible to connect
them incorrectly to the indicator panel.

4.10.2 STANDARD WORK

Switching weigher on.
•
Press ON/OFF button . A short HELLO message appears. Weigher moves into
weighing mode GROSS (total weight). Mode GROSS illuminates the change in
weight since the last weigher zeroing.
•
Press GROSS/NET button and within three seconds press ZERO button. "0"
appears on the screen confirming completion of weigher zeroing, weigher
moves to GROSS (total weight) weighing mode.
GROSS and NET mode
In GROSS mode the change in weight since the last weigher zeroing is displayed. Weigher is
in GROSS mode, if flashing arrow points to GROSS text (notice on right side of display
window).
NET mode indicates change after performance of operation TARE (vehicle weight). TARE is
temporarily a zero point. The weigher is in NET mode, if the flashing arrow indicates NET text
(notice on right side of display window).
Switching between NET and GROSS modes.
GROSS/NET button is an alternative function button. If the weigher is in GROSS mode, then
after pressing the GROSS/NET button the weigher sets itself in NET mode. If the weigher is
in NET mode, then after pressing GROSS/NET button the weigher sets itself in GROSS
mode.
Switching weigher off.
Press and hold ON/OFF button until BYE notice appears on display.
4.18