Operation No.9 - Inspection Of Greasing Points - PRONAR T740 Manual

TABLE 5.3 SPANNER ARM
WHEEL TIGHTENING TORQUE
[Nm]
450
Drawbar eye tightness should be checked simultaneously with wheel nut tightness checking.
Tightening torque should amount to 240 Nm. Nuts should be tightened gradually diagonally,
using torque spanner.
Bolts and nuts should be in good technical condition. Corroded parts or those with damaged
threads should be replaced.

5.2.13 OPERATION NO.9 - INSPECTION OF GREASING POINTS

TABLE 5.4 TRANS-SHIPMENT TRAILER GREASING SCHEDULE
ITEM
1 Hub bearing
2 Drawbar eye
3 Turning axle connecting pins
Turning axle stub axles
4
BODY WEIGHT (F)
GREASING POINT
5.17
[kg]
60
70
80
90
ARM LENGTH (L)
[m]
0.75
0.65
0.55
0.50
4 A 24M
1 B 14D
2 A
4 A
3M
1M