Consumables; Hydraulic Oil - PRONAR T740 Manual

Table of Contents

Advertisement

TIP
Channel slide position regulation must be performed with empty grain tank.
DANGER
Before entering grain tank switch off tractor engine, disconnect articulated telescopic
shaft, immobilise trans-shipment trailer using parking brake and secure tractor against
access of unauthorised persons.

5.4 CONSUMABLES

5.4.1 HYDRAULIC OIL

Always adhere to the principle that the oil in the trans-shipment trailer hydraulic system and
in the tractor hydraulic system are the same type. Application of different types of oil is not
permitted. In a new machine system is filled with HL32 hydraulic oil.
In the event of necessity of changing hydraulic oil for another oil, check the recommendations
of the oil manufacturer very carefully. If it is recommended to flush the system with the
appropriate preparation, then comply with these recommendations. Attention should be
given, so that chemical substances used for this purpose do not damage the materials of the
hydraulic system.
TABLE 5.6 HL32 HYDRAULIC OIL CHARACTERISTICS
ITEM
1
ISO 3448VG viscosity classification
2
Kinematic viscosity at 40
3
ISO 6743/99 viscosity classification
4
DIN 51502 quality classification
5
Ignition temperature
The oil applied because of its composition is not classified as a dangerous substance,
however long-term action on the skin or eyes may cause irritation. In the event of contact of
oil with skin wash the place of contact with water and soap. Do not apply organic solvents
NAME
0
C
5.37
VALUE
32
2
28.8 – 35.2 mm
/s
HL
HL
o
230
C

Advertisement

Table of Contents
loading

Table of Contents