Safety During Repair And Maintenance Work - PRONAR T740 Manual

• The trailer may only be used when all the safety guards and other protective
elements are technically sound and correctly positioned. In the event of loss or
destruction of the safety guards, they must be replaced with new ones.
• When operating the machine wear protective gloves and use the appropriate
tools.
• In the event of any fault or damage whatsoever, do not use the machine until the
fault has been corrected. Do NOT use damaged trans-shipment trailer.
• While walking or standing on trans-shipment trailer or in the container do NOT
use mudguards and wheels etc. for this purpose. Steps and platforms are
designed for use while working on trailer. Trans-shipment trailer and agricultural
tractor must at this time be immobilised with parking brake, articulated telescopic
shaft disconnected and the tractor cab closed and protected against access of
unauthorised persons. Trans-shipment trailer should be additionally protected
with the use of wedges.

2.2 SAFETY DURING REPAIR AND MAINTENANCE WORK

• Any modification to the trans-shipment trailer frees PRONAR Narew from any
responsibility for damage or detriment to health, which may arise as a result.
• It is recommended that necessary repairs to trans-shipment trailer should be
undertaken by specialised workshops. During the warranty period, any repairs
may only be carried out by a Warranty Service authorised by the manufacturer.
• In the event of a fault in the hydraulic or pneumatic system, do not use the trans-
shipment trailer until the fault has been remedied. There must not be any leaks of
hydraulic oil.
• Repair, maintenance and cleaning work should be carried out with the tractor's
engine switched off and the ignition key removed. Ensure that unauthorised
persons do not have access to the tractor's cab.
• Unauthorised regulation of rear wheel alignment is strictly forbidden. Incorrect
alignment leads to accelerated tyre wear and hinders steering.
2.3