Table of Contents
Advertisement
4.10 WEIGHER OPERATION
4.10.1 MOUNTING INDICATOR
Weight indicator should be placed in tractor operator cab. Panel should be secured with the
aid of rubber suction to windscreen. Select mounting place, we are indicator shall be visible
and animal operation will not cause difficulty during driving the tractor. After securing
indicator then connect conduit supply connecting attached to weighing system. Conduit
should be connected to panel socket – connection POWER, supply plug should be
connected to lighter socket. The second conduit - signal, should be connected to display
panel - LOAD CELL socket (second terminal of conduit is permanently connected to terminal
connection box).
IMPORTANT!
Supplied conduit must be disconnected during battery charging.
TABLE 4.2 SUPPLY CABLE STRAND MARKING
ITEM
1
RED
2
BLACK
3
ORANGE
BLUE
4
TABLE 4.3 SIGNAL CABLE STRAND MARKING
ITEM
1
WHITE
2
GREEN
3
RED
BLACK
4
COLOUR
COLOUR
Power supply +12V DC
Ground
Not used
Not used
Signal (+)
Signal (-)
Induction (+)
Induction (-)
4.17
INTENDED USE
INTENDED USE
Advertisement
Table of Contents
