Rear Chain Transmission - PRONAR T740 Manual

FIGURE 3.9 Front gear wheel transmission
(1) gear wheel transmission, (2) drive shaft (3) setting change lever, (A) neutral position,
(B) RAPID REVOLUTIONS position, (C) SLOW REVOLUTIONS position

3.7 REAR CHAIN TRANSMISSION

Rear chain transmission is mounted on container wall. It transmits torque from auger
conveyors placed in channel on the right side of the container to 2 conveyors placed on the
left side of the container. Construction of gearing is shown on figure (3.8).
3.14